NATiVE Solar

Home › Austin & Hill Country › Commercial Solar

Commercial & Industrial · Austin, TX

Commercial Solar & Battery Storage in Austin, TX

Solar and battery energy storage (BESS) for Austin and Hill Country businesses, nonprofits and public facilities, engineered around your interval data and your Austin Energy or PEC rate.

Installing since 20071,000+ projects60+ MW installedAustin Energy participating contractor

Talk with a commercial consultantCommercial solar + storage overview

NATiVE Solar by the numbers

2007
Installing in Texas since
Hundreds
Projects completed
60+ MW
Solar installed
In-house
EPC + O&M

The NATiVE Solar approach

Commercial solar engineered around your meter

NATiVE Solar approaches commercial projects as systems engineering problems, not commodity installs. We start with twelve months of your interval data, your rate class and when your facility peaks compared with the grid. Then we size solar and battery storage against those numbers, and only then layer Austin Energy incentives on top of a design that already makes sense for the building.

Engineering, procurement, construction and long-term operations and maintenance are handled in-house, so one team stays accountable from the first site walk through decades of service.

  • Austin Energy participating contractor
  • Licensed Texas electrical contractor (TECL-26718)
  • NABCEP-certified professionals
  • Member of the Amicus Solar Cooperative
675 kW rooftop solar array on Clinical Pathology Laboratories headquarters in Austin
Clinical Pathology Laboratories headquarters, Austin: 675 kW DC rooftop array.

Know your utility

Austin Energy or PEC? Your utility shapes the project

Most commercial properties in the Austin area are served by Austin Energy or Pedernales Electric Cooperative (PEC). The two treat solar, demand and incentives differently, so we confirm the rate for your meter before any design work.

Austin Energy

Typical area

City of Austin and parts of Travis and Williamson counties

How solar is credited

Value of Solar (VoS): production is metered separately and 100% of it is credited on the bill. Unused credit rolls forward month to month but can’t be moved between accounts.

Demand-based charges

Accounts at 10 kW and above pay a demand charge and a Regulatory Charge, both based on the account’s highest 15-minute demand each month.

Utility incentives

Choose a Performance-Based Incentive (PBI) or Capacity-Based Incentive (CBI), not both, or host a system under the Solar Standard Offer Program.

Third-party PPAs

Not eligible anywhere in Austin Energy territory.

Pedernales Electric Cooperative (PEC)

Typical area

Much of the Hill Country, including Dripping Springs, Bee Cave, Lakeway, Wimberley, Marble Falls and Johnson City

How solar is credited

The facility uses its own solar first. Systems under 50 kW AC earn PEC’s Sustainable Power Credit on surplus energy sent to the grid, and unused credits expire at the end of each calendar year. Large Power members with 50 kW AC or more of generation are credited at the ERCOT real-time wholesale price instead.

Demand-based charges

Members averaging 50 kW or more (Large Power) pay a Peak Capacity Charge of $6.74 per kW, set by the highest 15-minute interval each month, plus transmission (TCOS) of $6.11 per kW of 4CP demand. Small Power members (under 50 kW) pay no demand charge.

Utility incentives

No utility rebate on the standard interconnection rate.

Third-party PPAs

Confirmed during design for each project.

Some properties in Williamson, Bastrop and surrounding counties are served by other co-ops, municipal utilities or competitive retail providers. Rates and programs change over time; we confirm current terms for your address during design.

Demand charges

How Austin Energy bills commercial demand

For most commercial accounts, the energy you use (kWh) is only part of the bill. Austin Energy commercial customers at 10 kW and above also pay a demand charge and a Regulatory Charge, both set by the account’s own highest 15-minute demand (kW) in each billing month. The Regulatory Charge covers Austin Energy’s ERCOT transmission costs and related fees. For secondary-voltage customers it is $5.03 per kW as of October 1, 2026.

Summer matters in a second way. Once a year, Austin Energy averages your June through September demand to place the account in a rate class, such as 10–300 kW or 300 kW and above, and that class sets your per-kW rates for the next calendar year.

A simple illustration

$18.22
per kW of monthly peak, demand charge + Regulatory Charge (secondary, 300 kW+)
≈$1,822
lower demand-related charges in a month where the 15-minute peak drops by 100 kW

Based on Austin Energy’s posted rates effective October 1, 2026. Illustration only; actual results depend on your load shape, rate class, weather and system design, and vary month to month.

Proposed · decision expected December 2026

ERCOT 12CP: what could change

Texas regulators have proposed replacing the four-coincident-peak (4CP) method used to divide statewide transmission costs with twelve monthly peaks (12CP). Austin Energy customers aren’t billed on 4CP directly, but Austin Energy’s own share of the statewide transmission bill would be set by twelve peaks instead of four, and the City of Austin would decide how that reaches commercial rates. 4CP also feeds into how the Value of Solar rate credits avoided transmission costs, so that formula may need to change as well.

Many of the twelve monthly peaks are likely to fall on winter mornings and summer evenings, when solar output is low. That is the window battery energy storage and load controls are suited for. Full breakdown: ERCOT 12CP: what the end of 4CP means for Texas facilities.

Demand response & VPP

Putting a commercial battery to work for the grid

Beyond demand charge mitigation, a battery energy storage system (BESS) may help an Austin Energy commercial customer earn incentives for reducing load during summer events.

Austin Energy · commercial

Austin Energy Commercial Demand Response

Pays $50–$70 per average kW reduced (Standard) or $65–$80 (Fast DR) for events June 1–September 30 between 1 and 7 p.m., each up to two hours and no more than 25 a year, capped at $76,000 per facility per year. Standby or emergency generators can’t be used to offset load.

PEC · Hill Country

Pedernales Electric Cooperative

PEC doesn’t currently pay commercial members for demand response or battery participation. Its voluntary Power Rush Hour (June–September) asks members to cut use during summer peaks to lower the next year’s transmission costs.

Read the fine print. Demand response pays for reducing grid demand during called events; it is not guaranteed income. Enrolling a battery means keeping capacity available when events are called, which can compete with backup or demand charge goals, and most programs bar enrolling the same site in a conflicting program. Austin Energy’s program page doesn’t address battery storage directly. NATiVE Solar confirms eligibility and models the trade-offs before a battery is sized around any program.

Program terms checked against each program’s published materials in October 2026; programs change often and are subject to the provider’s current terms.

What NATiVE Solar builds

Solar, storage and service under one roof

Every system is permitted, built and commissioned by our own crews, then supported by the same team.

 

Rooftop, ground-mount and carport solar

For offices, labs, manufacturing, warehouses, retail, schools, places of worship and multi-site portfolios. Designed around your roof structure, 480 V three-phase service and interconnection requirements.

 

Battery energy storage (BESS)

Sized against twelve months of interval data for demand charge mitigation and load shifting. Backup for selected critical loads is possible, but it is a separate design requirement: a standard grid-tied commercial solar system shuts down during a grid outage. Batteries may also qualify for demand response programs (see below).

 

O&M, repowering and takeovers

Monitoring, preventive maintenance and repairs. We replace end-of-life inverters on aging arrays, as we did for International Biomedical, and take over systems whose original installer is gone.

Incentives & tax rules

Austin Energy incentives and federal tax rules

 

Austin Energy

  • Choose the Performance-Based Incentive (paid on production for five years) or the Capacity-Based Incentive (a one-time payment based on system size), not both. All production also earns the Value of Solar credit.
  • Property owners who don’t want to own a system can host one through the Solar Standard Offer Program.
  • Installation can’t begin until Austin Energy issues a Letter of Intent or Letter of Approval. If scope grows after that, the incentive doesn’t.
  • Funding is first-come, first-served, and Austin Energy can change levels and rules without notice.

Current rates and caps: Austin Energy’s 2026 commercial solar incentives.

 

Federal tax credit and depreciation

The Section 48E investment tax credit is still available to commercial solar on a tighter schedule. New solar projects that did not begin construction by July 4, 2026 generally must be placed in service by December 31, 2027 to qualify.

Battery energy storage remains eligible on a longer schedule, and foreign-entity (FEOC) sourcing rules now affect equipment selection. Eligibility depends on each project’s facts; confirm with your tax advisor.

More: commercial solar ITC and MACRS depreciation guide.

Permits & approvals

From interval data to permission to operate

NATiVE Solar prepares and submits the drawings, applications and inspection requests, and coordinate shutdowns with your facilities team so the work doesn’t disrupt operations.

1

Data & site review

Twelve months of interval data, a roof and electrical survey, and a review of your rate class and peaks.

2

Design & applications

Engineering, the Austin Energy DGPA or PEC interconnection application, and city or county permits.

3

Approval & build

Construction starts after the utility issues its Letter of Intent or Letter of Approval.

4

Inspection & O&M

Utility inspection and solar meter, commissioning, then monitoring and maintenance for the life of the system.

  • Inside the City of Austin: building and electrical permits go through the Development Services Department. Austin Energy reviews the Distributed Generation Planning Application (DGPA), inspects the system and sets the solar meter before it can be energized.
  • Larger projects: systems over 1 MW-AC must also meet Section D of Austin Energy’s Distribution Interconnection Guide.
  • Suburbs and the Hill Country: Round Rock, Cedar Park, Georgetown, Pflugerville, Lakeway, Bee Cave and Dripping Springs run their own permitting. In unincorporated areas, requirements depend on the county and the utility.
  • Battery storage: BESS projects may add fire code review, depending on the jurisdiction and where the equipment sits.

 

Local work

Commercial projects in Austin and the Hill Country

Clinical Pathology Laboratories rooftop solar, Austin

Austin · New installation

Clinical Pathology Laboratories

675 kW DC rooftop, 1,160 modules, 480 V three-phase.

NATiVE Solar service van at the International Biomedical facility in northeast Austin

Northeast Austin · Repowering + O&M

International Biomedical

Existing 135 kW DC array; four end-of-life inverters replaced with four new CPS units (150 kW AC). Commissioned September 2026.

Also in Austin: an off-grid solar + battery charging station in a shipping container for Rocket Electric Bikes at Mueller. See the full commercial portfolio →

FAQ

Austin commercial solar FAQ

Will commercial solar keep our facility running during an outage?
Not by itself. For safety, a grid-tied solar system shuts down when the grid goes down. Keeping selected loads running requires battery storage and switching equipment designed specifically for backup, which is a separate decision from sizing a system for demand charges.
Can a business use a solar power purchase agreement (PPA) in Austin?
Not in Austin Energy’s service territory. Third-party PPAs aren’t eligible there. Businesses typically own the system and choose a PBI or CBI incentive, and property owners who don’t want to own a system can look at the Solar Standard Offer Program.
Should we choose the PBI or the CBI?
It depends on system size, your cash flow priorities and how your finance team values a one-time payment against five years of production-based payments. We can model both for your site, and your controller or tax advisor should review the result.
Will battery storage lower our demand charges?
It may. How much depends on how sharp and how predictable your facility’s peaks are, your rate class and how the system is controlled. We model twelve months of interval data first; for some sites solar alone or load management does the job, and storage waits until the numbers support it.
Can you service or repower a system another company installed?
Yes. We take over, maintain and repower commercial systems from other installers, including companies that are no longer in business.
Is the federal tax credit still available for commercial solar?
Yes, on a tighter schedule. New solar projects that did not begin construction by July 4, 2026 generally must be placed in service by December 31, 2027, and battery storage has a longer runway. Confirm eligibility with your tax advisor.

NATiVE Solar

Talk with NATiVE Solar’s commercial team

Bring a recent utility bill or twelve months of interval data. We’ll tell you plainly whether solar, storage or both make sense for your facility, and what it would take.

NATiVE Solar  |  Austin & Hill Country

© 2026 NATiVE Solar. All rights reserved. Texas-based solar and energy storage contractor since 2007.